• Search result(s) : item(s)
  • 0

    You have no items in your shopping cart.

Search by tag

You searched for the following tag

shaft
Does it fit helicopter model / brand "xyz"?
Each of our EGODRIFT Tengu motors for 700 sized helis is available with 2 different shaft versions - 35mm to fit most models out there like XLPower, SAB, Gaui and many others, and a 55mm version for Align, Mikado (and a few others). Please choose you...
Read the FULL answer
Hi, can you make this motor 4035-520kv with longer shaft to fit on Logo 600SX ?
The standard shaft of the Tengu 4035 has a diameter of 6mm and an external length of 38mm, it should therefor be a perfect fit for the Logo 600SX. If you have any contradicting information that the shaft needs to be longer than that, please let us kn...
Read the FULL answer
What's with the screw hole in the bell / additional bell screw?
The hardware bag inside your Tengu motor box (sizes 40xx and up) contains a screw that will fit the screw hole in the motor bell. This screw serves 2 purposes
1) You can use it to additionally secure your bell and shaft together. The shaft sits in t...
Read the FULL answer
I was wondering if it is possible to get a 40mm long shaft for the TENGU 4025HS motor? How would I select it and are there any extra costs?
On popular request we've made the longer (6x40mm) scale shaft available (and selectable) via the configuration options of all 4025 motors - please select "6mm" and then "40mm - Scale, F3C, oxy5" from the dropdown options. There is no extra charge for...
Read the FULL answer
What motor do you recommend to run the oxy 5 (Meg)?
The motor we recommend for the oxy 5 Meg is the Tengu 4035HS from our 600 size lineup. The 560kV version appears to be the best fit. For the regular oxy 5 (non-meg) we recommend to go with one of the Tengu 4025HS models. Please select the longer (40m...
Read the FULL answer
Back to Topics