• Search result(s) : item(s)
  • 0

    You have no items in your shopping cart.

Search by tag

You searched for the following tag

tengu
Does it fit helicopter model / brand "xyz"?
Each of our EGODRIFT Tengu motors for 700 sized helis is available with 2 different shaft versions - 35mm to fit most models out there like XLPower, SAB, Gaui and many others, and a 55mm version for Align, Mikado (and a few others). Please choose you...
Read the FULL answer
Can it run 14S LiPo batteries?
While we tested the Tengu 4530/510kV successfully on 14S batteries, we recommend you get the dedicated 470kV version of the motor for 14S batteries -> {{widget type="catalog/product_widget_link" anchor_text="Tengu 4530/470kV motor for 14S bat...
Read the FULL answer
How to change Tengu motor shafts
Changing or replacing the shafts on our EGODRIFT Tengu motors for rc helis is a fairly easy and straightforward process. Simply follow the steps outlined below or watch the video on our YouTube channel that will demonstrate the process for you.
1) R...
Read the FULL answer
What is the difference between the HT and the HS motors?
The newly released HT (High Torque) Series offers quite a considerable power increase over the already powerful HS (High Speed) Series motors. This increase does come at the expense of a slight reduction in flight time.

The HT Series motors are de...
Read the FULL answer
Will the HT motors replace the HS motors in the future?
The Tengu HT Series motors offer the maximum available power and thus are not necessarily a replacement for their HS counterparts, or their successors, they rather have a slightly different orientation - for most pilots and applications, or when long...
Read the FULL answer
Best pwm setting for this motor?
Usually our motors can be run on all pwm rates / frequencies. A too high frequency will usually result in the esc getting warm/hot, so the best practice is to check your esc after flight and to drop your pwm rate in case you notice any heat developin...
Read the FULL answer
What is the correct timing and frequency fo the Tengu 2520HS?
Usually the best timing for the Tengu 2520HS motors is around 8-9 degrees of timing (based on Hobbywing) and a PWM rate of 32 should work just fine. The best way to check if the timing for your motor and setup is correct, is by measuring the temperat...
Read the FULL answer
Will it fit on a Synergy 696?
As our Tengu motors feature a very slim profile, any model of the 700-800 class (all Tengu 4525 and 4530 HS / HT models) will fit in the body of the Synergy 696.
Read the FULL answer
What frequency and pwm do I run the 4025 1050kv please
Usually our motors can be run on all pwm rates / frequencies. A too high frequency will usually result in the esc getting warm/hot, so the best practice is to check your esc after flight and to drop your pwm rate in case you notice any heat developin...
Read the FULL answer
What pwm rate / frequency should be set for this motor?
Usually our motors can be run on all pwm rates / frequencies. A too high frequency will usually result in the esc getting warm/hot, so the best practice is to check your esc after flight and to drop your pwm rate in case you notice any heat developin...
Read the FULL answer
More questions
Back to Topics