• Search result(s) : item(s)
  • 0

    You have no items in your shopping cart.

Search by tag

You searched for the following tag

frequency
Best pwm setting for this motor?
Usually our motors can be run on all pwm rates / frequencies. A too high frequency will usually result in the esc getting warm/hot, so the best practice is to check your esc after flight and to drop your pwm rate in case you notice any heat developin...
Read the FULL answer
What frequency and pwm do I run the 4025 1050kv please
Usually our motors can be run on all pwm rates / frequencies. A too high frequency will usually result in the esc getting warm/hot, so the best practice is to check your esc after flight and to drop your pwm rate in case you notice any heat developin...
Read the FULL answer
What pwm rate / frequency should be set for this motor?
Usually our motors can be run on all pwm rates / frequencies. A too high frequency will usually result in the esc getting warm/hot, so the best practice is to check your esc after flight and to drop your pwm rate in case you notice any heat developin...
Read the FULL answer
Motor timing for 4020 1050kv with hobbywing esc
Like with all Tengu HS models, we recommend to set the timing (advance) to around 9 degrees to start, and adjust in +/-1 steps if necessary. Please measure the temperature after the flight to check if the settings are fine.

Side note: The motor ha...
Read the FULL answer
What is the recommended timing for this motor?
Like with all Tengu HS models, we recommend to set the timing (advance) to around 9 degrees to start, and adjust in +/-1 steps if necessary. Please measure the temperature after the flight to check if the settings are fine.

Side note: The motor ha...
Read the FULL answer
Back to Topics