Search by tag

You searched for the following tag

temperature

What is the correct timing and frequency fo the Tengu 2520HS?

Usually the best timing for the Tengu 2520HS motors is around 8-9 degrees of timing (based on Hobbywing) and a PWM rate of 32 should work just fine. The best way to check if the timing for your motor and setup is correct, is by measuring the temperat...

Read the FULL answer

What timing should I use on the 4020 1050kv motor using a 120a hobbywing esc?

Our HS series motors tend to run best on a rather low timing, and we usually recommend starting at 9 degrees (on Hobbywing), and to test fly the heli (and measure the temperature with a temp gun after flight). If necessary, you can adjust (fine tune)...

Read the FULL answer

Back to Topics