You have no items in your shopping cart.
Our EGODRIFT BETA Series is your chance to fly our latest brushless motor creations first and before they're officially released (and yes, it's perfectly safe to run them even though they're called "Beta Series", the motors have been used by our team and many other pilots around the globe for well over a year now).
With the new HT generation of 4025, 4030 and 4035 motors we bring the proven and optimized winds of our 45xx sized HS and HT motors to the 550-600 class, alongside a modified (2.5mm higher) base for improved cooling (and even quieter operation, as an unexpected, yet welcome side effect).
The result is a faster switching, more rpm stable motor generation that delivers (even) more output power while eliminating potential amp spikes under heavy load (such as hard 3d flight) and improving flight time.
The 4025HT is your standard motor option for 500-550 size class.. Standard kVs for 6S setups are usually between 1050kV to a maximum of 1190kV, or around 550kV for 12S setups. A list of popular choices can be found below.
Important Update:
While 4025 has traditionally been the go-to size for the 550 class, and 600s on 6S (as the key there was always to keep the weight to a mimimum in an attempt to reduce stress on the packs), we have, since the release of the 4030HT, found that it actually outperforms the 4025HT in almost every setup from 550 to 600 size, all cell counts from 6S to 12S, and all combinations thereof. It also comes at almost the exact same weight (~375g) as most competing 4025 options, so for that reason we are confident to issue the following, general recommendation that fits the bill for almost all builds in the 500-600 class (and even some of the lightweight 700s out now), and replaces some of the information relating to the 4025HT beneath it:
The following recommendations have mostly been replaced by the list above, but we kept them here for completeness/comparison:
For larger than 550 blades (and even 550s really, especially in combination with 7S and up,) we recommend to check out our BETA Series 4030HT and BETA Series 4035HT models.
The first model within the 40xxHT generation was in fact the Tengu 4025HT/1190kV, released for and with the SAB Goblin Kraken 580, and while the BETA Series program was only created shortly after, the Tengu 4025HT/1190kV really constitutes the first model of the 40xx BETA Series generation and is technologically identical to the other models of the 4025HT range.
Please note that the shafts available for the 40xx HS models DO NOT fit the 40xx HT models. Shaft kits for the HT models are of course available as well (and linked at the end of the page) and we've recently added two new options for the 4025HT with the 5x32mm shaft (for Logo, Synergy, Tron) and the 6x40mm option (for scale and models with counterbearing supports).
No reviews have been submitted for this product yet.
