• Search result(s) : item(s)
  • 0

    You have no items in your shopping cart.

Search by tag

You searched for the following tag

hobbywing
What is the correct timing and frequency fo the Tengu 2520HS?
Usually the best timing for the Tengu 2520HS motors is around 8-9 degrees of timing (based on Hobbywing) and a PWM rate of 32 should work just fine. The best way to check if the timing for your motor and setup is correct, is by measuring the temperat...
Read the FULL answer
What timing should I use on the 4020 1050kv motor using a 120a hobbywing esc?
Our HS series motors tend to run best on a rather low timing, and we usually recommend starting at 9 degrees (on Hobbywing), and to test fly the heli (and measure the temperature with a temp gun after flight). If necessary, you can adjust (fine tune)...
Read the FULL answer
Motor timing for 4020 1050kv with hobbywing esc
Like with all Tengu HS models, we recommend to set the timing (advance) to around 9 degrees to start, and adjust in +/-1 steps if necessary. Please measure the temperature after the flight to check if the settings are fine.

Side note: The motor ha...
Read the FULL answer
I just recieved a 3220HS/900kV - how many poles do this motor have? What timing do you recommend?
The 3220HS is a 10 pole motor and like with most Tengu HS models, we recommend to set the timing at 9 degrees, test it in flight and adjust in +/-1 steps if necessary.
Read the FULL answer
Can this motor be used with a Hobbywing 160A for F3C?
Yes, for F3C flying there shouldn't be any issues running the Tengu 4035HT F3C Edition off a Hobbywing (or other quality) 130A esc.
Read the FULL answer
Which Timing can You recommend in combination with a HW100A V3 ESC?
We recommend to start with a timing value of 9 degrees, and to measure the temperature and performance in flight before making further adjustments (in +/- 1 degree steps if necessary). The ideal value varies from setup to setup, but can usually be fo...
Read the FULL answer
Back to Topics